Toilet Bowl Buying Guide

Toilets come in a number of styles, colours, and prices, but how efficient the flushing of the toilet bowl has nothing to do with these factors. Because our Malaysian law now stipulates that new toilets must use no more than 6 Litres of water per flush—compared with the 9 Litres used by older models—a reliable toilet will be one that generates enough power to clean the bowl.

Toilets come in one- or two-piece construction. Two-piece toilets employ a separate tank and bowl. One-piece toilets, also called "low profile," merge the tank and bowl into a single unit. A two-piece model will cost less, but a one-piece toilet is easier to clean because it does not have the crevice between the tank and the bowl.

Before shopping, be sure to measure the "rough-in," or the distance from the wall to the center of the toilet drain. Common "rough-in" are 300mm, 250mm and 200mm. In some cases, you might encounter 450mm or to the extend of 540mm "rough-in". Therefore, it is advisable to know the "rough-in" of your existing toilet bowl before going shopping for one.

One Piece
Two Piece

Toilet Seat and Cover

We have various types of seat cover available in our range which is compatible to all major brands in Malaysia i.e. American Standard, Armitage Shanks, Claytan, Inax, Inno, Johnson Suisse, Karat, Kimware, Econax, Ofia, Ideal Standard, Saniton, Kohler, Orin, Toto, Potex...etc...

Coloured seats are also available. Please email us at kiaoranax@gmail.com for more details.

Push Button and Lever Handle for Toilet

Push Button


Push Button



Lever Handle


Dual Flush Button


We have all the parts for Push Buttons (Single / Dual flush) and Lever Handle available in our range of spare parts.

QuarterTurn Taps

Many modern taps are fitted with ceramic cartridges rather than traditional washers on spindles and they work in a different way. These cartriges are often referred to as being maintenance free but of course they can be damaged and scratched. Therefore it would need to be replaced.

Ceramic cartridges are made with two ceramic discs each with two holes in it. One disc moves with the tap handle and the other disc remains in position. When these holes are aligned, the water is allowed to flow. In the off position, the holes are no longer aligned and the water stops.

Ceramic cartridge type taps can leak or drip and this is an indication that the discs have been damaged. You need to change the cartridge. It is important to note the brand of your tap inorder to get the replacement.

Tips for Buying Replacement Parts for Toilet

Buying replacement parts for toilets can be difficult, so it's a good idea to take photos of the toilet bowl and the spare parts that you need. Write down the name and model of your toilet. You will find this information in the inside back wall of the cistern, on the lid, or on the bowl behind the toilet.

Just because the shop that you go to doesn't carry a particular part / brand that you needed does not mean it is no longer available. Please give us an email with photos of the parts you needed. We have a wide range of spare parts available for brands i.e. American Standard, Armitage Shanks, Claytan, Inax, Inno, Johnson Suisse, Karat, Kimware, Econax, Ofia, Ideal Standard, Saniton, Kohler, Orin, Toto, Potex...etc...

You are welcome to email us for a free consultation.

Important Note: Never throw away old parts until you are certain the new parts are in proper working condition!

Parts for Cistern Internal Fittings!!!

Bumper for Toilet Seat Cover

Plastic Screw for Tank/Cistern


Silicon Rubber for Discharge Valve (Its time to change this item if water from the tank keeps on flowing into the water closet)


Rubber Diaphragm (Time to change this item if Ball Valve cannot stop the water from filling the tank)


Rubber Cushion / Doughnut (Time to change this item if water leaks between tank & toilet bowl)


We look into your needs in detail. Above are some of the parts which you would look for BUT do not know where to buy. We have it all here.

Spare Parts for various Flush Valves

We also carry spare parts for the above flush valves. From various types of piston, push button, metal spud, vacuum breaker and lever handles to fit various brands. We are specialised in this field. If you ever encounter water flowing non stop, leaking from push button or need any technical advise, Please feel free to contact us at kiaoranax@gmail.com .

Welcome to the world of toilet spare parts.

Do you face problems with the flushing of your water closets? Water overflowing non stop? Worn out cistern fittings? Looking for replacement parts? Don’t know where to buy? We are here to solve your problems and to make sure you have access to all the toilet spare parts needed to get your toilet back in full working condition.

We are dealing with Internal Fittings for water closets (Discharge valves, Inlet valves & Handles), Plastic Cistern and fittings, High Quality Toilet Seats & Covers and Plastic sanitary wares fixing accessories and spare parts.

All major brands in Malaysia are available.

Please feel free to contact me at kiaoranax@gmail.com should you need any technical information.